Enviroheat Hot Water System Prices
iStore builds heat pump hot water systems designed and engineered for Australian conditions. Instead of generating heat directly, as a traditional electric or gas storage system does, an iStore heat pump pulls warmth from the surrounding air and uses it to heat the water in the tank. That’s the same basic principle a fridge uses, just running in reverse, and it’s why the system can cut hot water energy use by up to 70% compared to a conventional electric storage unit.
Both iStore models run on R290, a natural refrigerant with a very low global warming potential compared to older synthetic refrigerants. They’re built with weekly anti-legionella sanitising cycles and smart anti-frost logic, so the system keeps running efficiently through cooler months without you needing to think about it.
Delivery Information
All of our iStore Australia Hot Water Systems have free delivery to Melbourne, Wollongong, Sydney, Central Coast, Adelaide, Newcastle, Perth and South East Queensland.
About Envirosun Products
Enviroheat is the heat pump range built by Envirosun, a family-owned Australian brand with roots going back to the early days of the solar hot water industry in the 1970s. The systems are assembled in Australia, built from components sourced from Australian, Dutch, Italian, and Chinese manufacturers depending on which part does the job best.
A heat pump works by pulling heat out of the surrounding air rather than generating it directly, which is why it costs less to run day to day than a standard electric storage system. That makes Enviroheat a solid option for households moving away from an old electric tank without wanting the upfront cost or roof space needed for a full solar system.
To find the right Enviroheat system for your household, contact us on 1300 721 996 and we’ll talk you through your options.
Browse Our Enviroheat/Envirosun Hot Water Systems
Heat Pump Systems
-

Envirosun/Enviroheat Heat Pump Water Heater Model 200EH1-14
Read more -

Envirosun/Enviroheat Heat Pump Plus Water Heater Model 250EH1-15
Read more -

Envirosun/Enviroheat Heat Pump Water Heater Model ES200M9
Supply Only $3,000.00Supply & Install
NSW $2,700.00VIC $1,780.00QLD $2,950.00WA $2,900.00SA $2,700.00Add to cart Supply & Install -

Envirosun/Enviroheat Heat Pump Water Heater Model ES330M9
Supply Only $3,300.00Supply & Install
NSW $3,350.00VIC $1,850.00QLD $3,350.00WA $3,200.00SA $3,200.00Add to cart Supply & Install
Solar Hot Water Systems
Enviroheat Heat Pump Hot Water Systems
Enviroheat Heat Pump Water Heater ES200M9
Supply Only $3,000.00
Supply & Install NSW $2,850.00 | VIC $1,680.00 | QLD $2,950.00 | WA $2,900.00 | SA $2,800.00
Warranty: 7-year storage cylinder, 5-year compressor and parts, 1-year onsite labour
Enviroheat Heat Pump Water Heater ES330M9
Supply Only $3,300.00
Supply & Install NSW $3,500.00 | VIC $2,150.00 | QLD $3,350.00 | WA $3,200.00 | SA $3,300.00
Warranty: 10-year storage cylinder, 10-year compressor and parts, 2-year onsite labour
We also stock the earlier Enviroheat 200EH1-14 and Heat Pump Plus 250EH1-15 models. Pricing on these depends on your location and current setup, so give us a call on 1300 721 996 for a quote.
Interested in a Enviroheat Hot Water System?
Call Same Day Hot Water Service now.
- Pricing is subject to site conditions and onsite inspection.
- Note: laundry, apartment, and cupboard installations will likely require onsite quotation and may not be subject to advertised pricing due to complexity of works.
- Supply & Install prices are for like for like installations.
- Supply & Install prices include removal of old system.
- Supply & Install products purchased by credit card are subject to an additional 1% surcharge.
- Open air free parking space will need to be provided by customer at the same location as the installation. Additional charges may apply if this cannot be provided.
- Additional ($110.00 Incl GST) cost for installation of a cold water expansion valve if required.
- Hot Water Systems may require a 20% restocking fee.
- Non 50˚C preset models require a tempering valve ($185.00 inc GST) if feeding bathrooms or general hand washing areas.
- Additional ($90.00 inc GST) cost for installation of 15mm Duo Valve if required.
- Additional ($110.00 inc GST) cost for installation of 15mm Pressure Limiting Valve if required.
- Additional ($80.00 inc GST) cost for Concrete Slab or Pizza Base if required.
- Additional ($440.00 inc GST) cost for safe tray and Mildred valve if required.



